Motorcycle enthusiasts typically cherish their bikes, and proper maintenance practices are crucial for the overall condition and lifespan of the vehicle. Below are a few points that motorcycle beginners should pay attention to.
Running-in Period
The break-in period for motorcycles is a crucial phase. It is highly important during the initial 1500 kilometers of owning a new motorcycle. During this stage, it is advisable not to operate the motorcycle at full load. Try to avoid exceeding the speed limits for each gear, as this practice contributes to an extended lifespan for the motorcycle.
Preheating
Preheating in advance is essential. In the summer, preheating for about 1 minute is generally sufficient, while in the winter, preheating for over 3 minutes is recommended. This helps protect various components of the motorcycle.
During motorcycle preheating, use idle or low throttle speeds. You can maintain preheating without stalling by adjusting the choke and throttle. The preheating time should not be excessively long. Once the engine has warmed up a bit, you can slowly ride with a partially pulled choke (to prevent stalling) at low speed. Gradually return the choke to normal as the engine runs stably. Avoid using a heavy throttle during preheating, as it can increase engine wear and potentially lead to serious
Cleaning
When riding a motorcycle, please pay attention to regular cleaning to reduce the accumulation of dust and improve the efficiency of the motorcycle.
Lubrication
The replacement of motorcycle engine oil should primarily consider factors such as mileage, frequency of use, refueling intervals, and oil quality. In practice, maintenance is often based on mileage. Under normal circumstances, it is recommended to change the motorcycle engine oil every thousand kilometers, especially during the initial break-in period of a new bike. Even beyond the break-in period, adding lubricant to the engine, even if it’s standard mineral oil, is advisable within 2,000 km.
Taking the CBF190X as an example, the first maintenance interval should be at 500 km, and thereafter, the engine oil can be changed every 1000 km until 3000 km. After the break-in period, adjustments can be made based on actual usage conditions and the quality of lubricating oil.
Do not hastily twist the throttle. When preparing to ride the motorcycle each day, refrain from quickly turning the motorcycle’s ignition. Instead, gently press down on the foot pedal a few times to allow the cylinder to intake a bit more combustible mixture. Afterward, turn the key to the ignition position before starting the bike. This technique is particularly effective when starting a motorcycle in winter.
Do not hastily twist the throttle
When preparing to ride the motorcycle each day, refrain from quickly turning the motorcycle’s ignition. Instead, gently press down on the foot pedal a few times to allow the cylinder to intake a bit more combustible mixture. Afterward, turn the key to the ignition position before starting the bike. This technique is particularly effective when starting a motorcycle in winter.
Tires
Motorcycle tires come into contact with various road surfaces daily, making them consumable items. They can often be damaged due to factors such as stones and glass. The performance and condition of the tires directly affect the rider’s control of the vehicle and overall comfort. Therefore, checking the motorcycle’s tires before riding helps enhance the safety factor of the journey.
